Aero Sense Cleaner will remove oil, grease and dirt in no time, and will leave a microscopic film on your aircraft which inhibits settling of dirt particles and corrosion. Aero Sense Cleaner gives a more glossy appearance to the surface without attacking sensitive materials, such as windshields and plastics. Aero Sense Cleaner meets Boeing Spec D6-14787 and is widely used in commercial aviation.

• Removes dirt, insects and grease
• Suitable for metal, composite and fabric
• Enhances corrosion resistance
• Meets Boeing spec D6-14787
• Supplied as concentrate, for use mix 1 part cleaner with 20 parts water
  

Micro-Mesh Windshield Restoral Kit contains all the materials required to make your old windshield look like new. A series of cushioned, cloth-backed, abrasive sheets removes surface defects caused by airstream erosion and scratching prviding greater visibility with improved safety. Effective also on landing & recognition lights and instrument dials. Use wet or dry and finish with anti-static cream.

Use this kit by hand to restore up to 30 square feet of acrylic. NSN#5350 01 290 4002. This versatile kit will remove light damage and restore optical clarity. The included MICRO-GLOSS™ liquid abrasive can be used as a cleaner.

One kit per unit each. Kit contents include: •1 - 3" x 6" Sheet MICRO-MESH™1500
•1 - 3" X 6" Sheet MICRO-MESH™1800
•1 - 3" X 6" Sheet MICRO-MESH™ 2400
•1 - 3" X 6" Sheet MICRO-MESH™ 3600
•1 - 3" X 6" Sheet MICRO-MESH™ 4000
•1 - 3" x 6" Sheet MICRO-MESH™ 6000
•1 - 2 OZ. Micro-Gloss Liquid Abrasive
•1 - 3" x 3" Foam Block
•2 - Flannel Sheets

ACF (Anti-Corrosion Formula), is a state of the art, anti-corrosion lubricant compound that actively treats metal using advanced polar bonding technology. ACF-50's synthetic inhibitors and active chemistry penetrates through the oxide deposits to the base of the corrosion cell where it emulsifies, encapsulates, and then lifts the electrolyte away from the metal surface. ACF-50 then allows any moisture to evaporate while providing an atmospheric barrier that prevents further moisture contact. With the electrolyte removed the corrosion process is halted. It will then remain active and effective for 24 months. Other quantities/sizes are available.

ACF-50 (Anti-Corrosion Formula), is a state of the art, anti-corrosion lubricant compound that actively treats ferrous and non-ferrous metals using advanced polar bonding technology.

ACF-50's synthetic inhibitors and active chemistry penetrates through the oxide deposits (white powder) to the base of the corrosion cell where it emulsifies, encapsulates and then lifts the electrolyte away from the metal surface.

ACF-50 then allows any moisture to evaporate while providing an atmospheric barrier that prevents further moisture contact.

With the electrolyte removed the corrosion process is halted.

ACF-50 actively penetrates and 'creeps' into the tightest seams, lap joints, micro cracks and around rivet heads, displacing moisture and other corrosive fluids in these corrosion prone areas.

ACF-50's thin film acts like an 'OFF SWITCH' for corrosion remaining effecive for up to 24 months.

SUGGESTED APPLICATIONS:

Single Engine & Light Twins:
Spray into: wing sections, fuselage, vertical & horizontal stabilizers, hinges, teleflex cables, throttle cables, battery boxes, engine compartments, avionics and antenna mounts.

Rotorwing Aircraft:
Spray into: tail boom section, engine compartments, strap pack, landing gear, air vent cables, rotor head, grip areas, avionics, antenna mounts, cannon plugs.

Cargo & Airliners:
Spray into: wing sections, fuselage vertical & horizontal stabilizers, landing gear compartments, micro switches, avionics, cannon plugs, cargo door brackets, rubbish chutes, galleys, lavatory areas, belly skin sections, main spar sections.

Float Equipped & Amphibious Aircraft:
Spray into: floats, fuselage, vertical & horizontal stabilzers, wing sections, bilge area, exterior of engines, connectors, cannon plugs, avionics, micro switches, antenna mounts.

Turbo Prop. & Business Jets:
Spray into; trim drum actuators, micro switches, landing gear and compartments, wheel hubs, thrust reverse mechanisms. Wipe on nacelles.In addition,

ACF-50 can be used on all types of plastics, paints and seals without fear of damage.


This is a 13oz aerosol.